Change or rekey · Oakville
Smart Lock Installation
Arthritis has made the small house key hard to grip and turn, especially with gloves on in January.
In plain words
Smart lock installation puts an electronic deadbolt or lever on your door that opens with a code, a phone, a fob or a fingerprint, and, on some models, a conventional key too. The locksmith confirms you control the property, measures the door and its holes, and makes sure the bolt travels freely, because a battery motor has less strength than a hand. The hardware is fitted with a solid strike, the maker's specified batteries go in, and the lock is set up under your own account. You leave with codes working and, on a keyed model, the override key tested and the old key retired.
How the visit goesArthritis has made the small house key hard to grip and turn, especially with gloves on in January. Pressing a few buttons, or tapping a fob against the lock, would make coming home in winter far easier.
Smart Lock Installation
How the visit goes
Who controls the door
A smart lock hands out access, so the visit begins by confirming who is entitled to grant it. For an owner that is photo identification and a link to the address; for a tenant it also means the landlord has agreed to the change, since in a rental both parties need a working way in. Where a property manager or a family member is arranging the work on someone else's behalf, the locksmith asks for that person's go-ahead as well. When a used smart lock is being taken over, the check extends to the account behind it, which must be released by whoever set it up. Ten minutes of paperwork here keeps everyone's access legitimate.
Rekeying the override so the old key retires
Most keypad deadbolts keep a small conventional backup cylinder, and leaving it on the old key would undo half the point of the upgrade. The locksmith removes it, slides the plug out with a follower, repins it to a fresh combination, then cuts and tests new keys. Where the household wants one key for everything and the cylinders share a compatible keyway, the back and side doors are rekeyed to the same combination so a single key runs the override and the mechanical locks alike. Some makers reset the cylinder with a tool and the new key rather than by repinning; the method changes, the outcome is the same. The old key no longer opens any cylinder that was rekeyed.
Knowing what works when the internet is out
You leave with a clear picture of what the lock does on its own. On most models the keypad, the key and any fob keep working with no network at all, because they talk to the lock directly; what needs the internet is checking or changing the lock from far away and receiving alerts. Codes and schedules stored in the lock carry on through a router reboot or a power cut. The locksmith will have named which functions on your specific model depend on Wi-Fi or a hub, so a quiet evening with no connection is an inconvenience for the app and nothing more for the door.
Smart Lock Installation
In the van
Hand screwdrivers, Phillips and Torx
Dry PTFE lubricant
Wi-Fi bridge or home hub
Reinforced box strike with long screws
Adjustable-backset bolt and faceplate
Smart Lock Installation
What affects the quote
Number of doors
A single front door is the base case. Adding the back door, the garage entry or a side door, whether each gets its own smart lock or is rekeyed to match the override key, extends the visit accordingly.
Finish and matching hardware
Standard finishes are the base. A less common finish, or replacing the knob or lever at the same time so the door matches, adds to the hardware portion of the quote.
Pairing a smart deadbolt with a smart lever on the same door
Some doors get a smart deadbolt only, while others pair it with a smart lever below so both turn from one app and share the same codes. Fitting and programming two devices on one door takes more work than one, confirmed once the door and hardware are seen.
What to have ready
- Which door is the smart lock for, and what is it made of?
- Is there already a keypad or app lock on the door, and who set it up?
- Do you already have a specific lock in mind or in hand?
Smart Lock Installation: questions
QuestionsWill a smart lock fit my existing door?
Most residential doors have the standard preparation these locks are designed around: a large hole for the lock body, a smaller one in the edge for the bolt, and a thickness between roughly 35 and 45 millimetres. The locksmith measures all three plus the backset before recommending a model. Thicker doors take an extension kit, thin or glass-panelled doors and older doors with a mortise pocket call for a particular model or some preparation, and all of that is sorted out before the box is opened.
Can the back door and garage door be put on the same system?
Yes, in one of two ways. Each door can get its own smart lock, all managed from the same app and account, with the same codes working at every door. Or, where the cylinders share a compatible keyway, the other doors can stay mechanical and be rekeyed so a single key operates them and the smart lock's override cylinder alike. Many households do the front door first and add the others later; the account and the codes carry across.
I rent. Can I have a smart lock installed?
Yes, with your landlord's agreement first. Tenancy rules in this province expect a tenant to have the landlord's consent before changing a lock, and expect the landlord to have a working way in, so the sensible route is a short conversation and a note of what will be fitted. A retrofit model that mounts inside and keeps the existing exterior lock and key is often the easiest thing for a landlord to say yes to, since the door is unchanged from outside.
