Car keys · Oakville
Ignition Lock Repair
The car arrived with one worn-looking key and a story about a lost spare.
In plain words
The visit follows a steady order. On the phone, the vehicle and the exact symptom are described so the right parts and tools come along for the trip. On arrival, ownership is confirmed, the mechanism is assessed, and the cylinder is serviced, repinned or replaced as the fault requires. Every switch position is tested afterward, along with the steering lock, before the visit is called finished and any remaining electronic question is named separately.
How the visit goesThe car arrived with one worn-looking key and a story about a lost spare. It turns the ignition, eventually, after some patience and a particular angle nobody in the household can quite describe or repeat on the first try.
Ignition Lock Repair
How the visit goes
Checking the other locks on the same key
Before deciding how to repin or replace the ignition cylinder, the locksmith asks about the rest of the vehicle. Do the doors and the trunk share a key with the ignition, or does one of them already need a different one? Keeping that arrangement in mind before any pinning begins means the finished repair either preserves a single working key across the vehicle or explains clearly why one lock now sits apart from the rest of them.
Servicing the cylinder in place first
The first option is always the least invasive one: cleaning out the keyway, freeing a wafer that has stuck in a raised position, and lubricating the mechanism so the existing cylinder goes back to turning the way it should. This keeps the original hardware on the vehicle and avoids cutting a new key altogether when the fault turns out to be wear or contamination rather than a broken part. Only when this fails to restore normal behaviour does the barrel come out of the column.
One key doing everything it did before
If the doors and trunk already shared a key with the ignition, that arrangement is preserved or restored wherever the vehicle's design allows it, so the same key you carry now still opens everything it used to open before. Where a new key was cut, it is tested in every lock on the vehicle before the visit is called finished, not only in the ignition itself, so a lock quietly left out never becomes tomorrow's surprise.
Ignition Lock Repair
In the van
Keyed-alike pinning kit
Broken key extractors
Ignition lock cylinder
Cylinder decoder
Key code reader
Ignition Lock Repair
What affects the quote
Confirming ownership on a recently purchased vehicle
A vehicle bought used, with incomplete paperwork or an unclear ownership history, takes a little longer to verify before any work begins, compared with a vehicle whose registration and owner are already on file.
Time needed to test every position
Cycling the ignition through every switch position and the steering lock, more than once, with the engine started and stopped to confirm the repair holds, adds a small amount of time on top of the repair.
Distance to where the vehicle is
Travel is part of every visit, and a vehicle parked across town takes a different amount of driving time to reach than one nearby, which factors into how the visit gets arranged.
What to have ready
- Where is the vehicle parked right now?
- Do you have the vehicle permit or proof of ownership handy?
- Do the doors or trunk use the same key as the ignition?
Ignition Lock Repair: questions
QuestionsWill the same key still open my doors and trunk after this repair?
If the doors and trunk already shared a key with the ignition, that arrangement is kept in mind throughout the repair and preserved wherever the vehicle's hardware allows it. Where a new cylinder or new pinning is involved, the other locks are tested against the new key before the visit ends, so nothing is left running on two different keys by accident.
My key turns but the engine doesn't crank. Is that an ignition lock problem?
It can be, but it can also point past the lock entirely, toward the electronic immobilizer, the transponder chip in the key, or wiring behind the switch. The locksmith checks whether the barrel itself moves cleanly through every position first. If it does, and the vehicle still stays silent, the electronic side is one possibility among several, alongside the battery, starter and park/neutral circuit, so the cause is diagnosed rather than assumed.
How do I keep my ignition and keys in good shape going forward?
A little attention goes a long way: whatever lubricant the vehicle's own service information calls for worked into the keyway, keys wiped free of grit before use, and a worn or bent key retired in favour of a fresh cut from a crisp original. Catching a barrel that has started needing a wiggle early keeps it an easy fix rather than a stuck ignition later on.
Related services
- Car Key ReplacementThe fob went through the washing machine in a jacket pocket.
- Spare Car Key DuplicationA car sits at the cottage all season, and the only key to it lives on a ring three hours away in the city.
- Key Fob ProgrammingA cracked case or a spin through the wash left the fob unresponsive, and opening it up reveals a slightly corroded board where the buttons used to sit.